Products
Isoprime PU Polyurethane Based Solvent Based Absorbent Surface Primer
Product Description
ISOPRIME PU is a single-component, polyurethane-based, solvent-based, moisture-curing, high-penetration primer for absorbent surfaces.
Applications:
It is used on all cement-based interior and exterior surfaces, as a penetration resin on old surfaces requiring reinforcement, and as a primer for Isopave Stone Carpet applications on metal surfaces.
Resin Type: Polyurethane
Color: Light yellow
Solvent: Solvent
Odor: High solvent
Mixing Ratio: Ready-to-use single component
Mixing Density: ~0.900 kg/lt
Application Time: 20-35 min (varies depending on air temperature)
Volatile Matter (VOC) Content: High
Viscosity (Brookfield 25 °C): 50-100 mPa.s
Application Temperature: 5°C - 30°C
Initial Curing: > 2 hours
Full Curing Time: 24 Hours (24 °C Room Temperature)
Suitable for indoor and outdoor use. Due to its solvent content, ventilation is recommended after indoor use.
It has high penetration properties due to its solvent content.
Easy to apply (roller or airless spray).
Provides excellent adhesion to absorbent surfaces and metal.
Cures quickly.
Provides sufficient flexibility to follow surface movements.
Heat and frost resistant. Prevents dust formation on the surface and adheres existing dust to the surface. Maintains its mechanical properties in the temperature range of -20 °C to +80 °C.
The surface must be clean, dry, and completely free of loose particles, grease, oil, or any substance that would prevent proper adhesion. If there are cracks or breaks in the surface, they should be repaired with high-strength repair mortar before application. Application can begin after the surface has dried. Isoprime PU is applied to the surface with a roller. If the surface is very absorbent, the primer used may disappear on the surface. On very absorbent surfaces, a second coat can be applied 3-5 hours after the first coat.
Consumption:
200-250 g/m² (varies depending on application thickness.)
- Surface problems may occur in applications performed in environments below +5ºC and above +35ºC.
- Application surfaces must be dry and clean.
- Application should be carried out according to the specified application characteristics.
- After partial use, the container should be tightly closed.
- Avoid contact with skin and eyes; in case of contact, wash with plenty of water and consult a doctor.
- The product should not be exposed to water during the drying time.
- Equipment should be cleaned immediately after application, before it hardens.
- Empty containers should not be used to store food or drinking water.
- Safety and Health Warnings:
- Protective goggles, clothing, mask, and gloves should be worn.
- Avoid contact with skin, eyes, and clothing.
- Ensure adequate ventilation during indoor applications.
- Prevent the product from spreading into the environment. Protect from direct sunlight.
- Do not eat, drink, or smoke during use.
- Carefully package all containers and packaging to minimize spills. Containers should be kept tightly closed when not in use.
- They should be kept away from heat, sparks, flames, and hot surfaces.
- Broken packages should not be transported without protective equipment.
- Empty containers should not be reused. They should be considered contaminated.
- If clothing becomes soiled, it should be removed immediately and washed before reuse.
- The product should be stored in containers that are clearly labeled.
- Keep out of reach of children.
- Keep away from food, beverages, and animal feed.
- Storage should only be in the original container.
- Containers should be stored upright in a cool, well-ventilated place, tightly closed.
- Containers should be protected from damage.
- The data and recommendations or other support services contained in this document are based on our current knowledge and experience and are provided to the best of our knowledge. Given the many factors that may affect the processing and application of our products, this data does not exempt processors from conducting their own research and testing, particularly regarding the suitability of the supplied goods for the processes and purposes for which they are intended to be used; Furthermore, this data does not constitute a guarantee of specific characteristics or the suitability of the product for a particular purpose. Any description, drawing, photograph, data, ratio, weight, measured value, etc., given herein are subject to change without prior notice and do not constitute the agreed contractual quality of the product. It is the responsibility of the buyer of our products to ensure that all proprietary rights and applicable laws and regulations are complied with.
Available in 3 liter, 5 liter, and 10 liter tin cans.
Can be stored for one year in unopened original packaging at temperatures between 5-35°C, away from direct sunlight. Protect from excessive heat, direct sunlight, and humidity. Close the container tightly after use.