Products
Isopave® Ultramax
Product Description
Isopave® Ultramax, 1K is recommended to be applied with the ready-to-use method. It is a gravel ratio developed for medium pedestrian loads, gravel size and dust binding resin contained in gravel. It is between 3-5% of gravel weight depending on aliphatic polyurethane. It does not deviate due to its structure. It is environmentally friendly due to its intensive solvent-free formation and is compatible with pouring and spraying due to its plant consistency.
Resin Type: Polyurethane
Color: Transparent
Usage: Ready to Use
Odor: None
Density (mixture): 1.120 kg/lt
Viscosity: 1500-2500 cP
Drying Time: Touch dry 2 hours, fully cured 24 hours (at 24°C)
VOC content: Low
Solvent: None
- It has excellent UV resistance.
- It has excellent adhesion to the substrate.
- It is single-component.
- Ready to use.
- Solvent-free, 100% solid content.
- Provides a long working time.
- Yellowing resistant, does not yellow over time.
- Curing time varies depending on air temperature. The reaction speeds up in hot weather and slows down in cold weather. Not mixing before use provides a labor advantage.
The concrete to be coated must be cured for at least 28 days. After application, the cured surface should be cleaned of mortar residue, etc., using light sanding or brushing. Old paint, dirt, dust, and other loose particles on old concrete and plaster surfaces should be removed by sanding, scraping, or brushing. Oil and grease residues should be cleaned with detergent and water. The surface must be free of anti-adhesion agents, loose and volatile particles. The concrete surface moisture should be below 5%. IsoPrime 1K and IsoEpoPrime 2K primers should be applied to the surface before application.
Mixing should be homogeneous; special mixers should be used for this purpose. The mixture should be poured onto the surface, leveled, and then applied by pressing with an oval trowel. Special Isopave trowel oil should be used to lubricate the trowel. For large areas, the use of an Isopave troweling machine is recommended.
Application should not be done on damp, wet, frozen, or dirty/oily surfaces.
The mixed material should be poured onto the surface without delay. Application should be done between +5°C and +25°C. Application should absolutely not be done at temperatures below 5°C.
In hot climates, products and stones should be kept in the shade to extend the reaction time.
In very hot climates, working in close proximity should be ensured to prevent the formation of joints during application.
Solvents should not be used as trowel release agents. Otherwise, the solvent will reduce the strength of the resin on the surface and the adhesion of the stones will decrease.
- Application should not be done on damp, wet, frozen, or dirty/oily surfaces. The mixed material should be poured onto the surface without delay. Application should be done between +5°C and +35°C. Application should absolutely not be done at temperatures below 5°C. In hot climates, products and stones should be kept in the shade to allow for a longer reaction time. In very hot climates, work in close proximity to each other to prevent the formation of joints during application. Solvents should not be used as trowel release agents. Otherwise, the solvent will reduce the strength of the resin on the surface and the adhesion of the stones will decrease.
- Surface problems may occur in applications performed in environments below +5°C and above +35°C. Application surfaces must be dry and clean. Before application, the safety precautions specified on the can and in the TDS should be taken. Application should be carried out according to the specified application characteristics.
- After partial use; the container should be tightly closed and care should be taken to prevent air from entering the container.
- Avoid contact with skin and eyes; in case of contact, wash with plenty of water and consult a doctor.
- The product should not be exposed to water during the drying period.
- Immediately after application, before the resin hardens, equipment should be cleaned with cellulosic thinner.
- Stone Carpet is not a waterproofing material and is permeable. For indoor and outdoor areas where impermeability is desired, it is recommended that waterproofing be done before application.
- Empty packaging should not be used to store food or drinking water.
- Safety and Health Warnings:
- Protective eyewear, clothing, and gloves should be worn.
- Avoid contact with skin, eyes, and clothing.
- Prevent the product from spreading to the environment.
- Do not eat, drink, or smoke during use.
- All packaging and containers should be carefully packaged to minimize spills.
- Containers should be kept tightly sealed when not in use.
- Keep away from heat, sparks, flames, and hot surfaces.
- Do not transport broken packages without protective equipment.
- Empty containers should not be reused. They should be treated as contaminated waste.
- If the garment becomes soiled, it should be removed immediately and washed before reuse.
- The product should be stored in clearly labeled containers.
- Keep out of reach of children.
- Keep away from food, beverages and animal feed.
- Storage should only be in the original container.
- Containers should be stored tightly closed, upright in a cool, well-ventilated place.
- Containers should be protected from damage.
- The data and recommendations or other support services contained in this document are based on our current knowledge and experience and are provided to the best of our knowledge. Given the many factors that may affect the processing and application of our products, this data does not exempt processors from conducting their own research and testing, particularly regarding the suitability of the supplied goods for the processes and purposes for which they are intended; furthermore, this data does not constitute a guarantee of any particular properties or the suitability of the product for a particular purpose. Any description, drawing, photograph, data, ratio, weight, measured value, etc. given herein is subject to change without notice and does not constitute the agreed contractual quality of the product. It is the responsibility of the buyer of our products to ensure that all property rights and applicable laws and regulations are respected.
10 Kg Plastic Drum
20 Kg Plastic Drum
30 Kg Plastic Drum
200 Kg Steel Barrel