Products
Isoepoxbind Epoxy Based Indoor Resin
Product Description
ISOEPOXBIND is a two-component, epoxy-based stone carpet resin suitable for interior applications. Due to the epoxy's sensitivity to temperature changes and yellowing, it is not recommended for exterior use.
Areas of Use:
Used in interior floor coverings, stairs, showrooms, and offices.
Components: Epoxy
Color: Transparent-Glossy
Solid content: 100%
Usage rate: 6%
Mixing Ratio (A+B): A: 66% B: 33%
Mixing Density: ~1.05 gr/lt
Application time: 20-30 min (varies depending on air temperature)
Viscosity (Brookfield 25 °C): 600-700 mPa.s
Application Temperature: 5°C - 30°C
Initial curing: > 24 hours
Opening to pedestrian traffic: > 48 hours
Full curing time: 7 days
It is a 2-component product.
It ensures that the stones adhere tightly to each other.
Easy to apply.
Permeable. Does not accumulate water on the surface.
Solvent-free. Odorless.
Suitable for indoor use.
Resistant to high and low temperatures.
The climatic conditions of the application area are extremely important. Ensuring proper and permanent adhesion to the surface is crucial for stone carpet application. Therefore, the application should be done on concrete of at least C20 quality or on a solid asphalt surface. If there are cracks on the surface, they should be opened in a V shape and repaired with epoxy repair mortar. Afterwards, Isoprimepox or Isoprime PU primer should be applied to the surface. If the surface is considered weak, it should be primed with Isoprimepox in two coats. Immediately after the second coat of primer, Isotex 160 and Isotex 300 mesh epoxy should be glued to the surface before the primer dries.
Before mixing, ensure the stones are dry and dust-free. Components A and B should first be mixed together using a drill for 2 minutes. The stones should be added to the mixer, and the prepared resin should be added while the mixing process continues. For an ideal mixture, the Isopave Stone Carpet Mixer, specifically designed for stone carpets, should be used. After a 5-minute mixing process, ensure the resin coats all the edges of the stones, making sure no dry areas remain. The amount of resin to be used varies between 6% and 7% of the stone's weight, depending on its surface structure and size. Using too much resin will cause foaming, so the optimum amount should be used. When mixing with a hand mixer using a bucket measuring tool, the bottom of the bucket may not be homogeneous. In such a case, the mixture should be transferred to a different bucket, and mixing should continue in the new bucket.
In stone carpet applications, ensuring thickness homogeneity and surface smoothness is extremely important. Therefore, after the stones are laid on the ground, a leveling screed and special Isopave Pulling Trolleys should be used to spread them. After spreading, application should be done to the surface using special trowels lubricated with Isopave Trowel Oil. Remember that applying pressure to the surface during application will bond the stones more tightly and interlock them. If thinner or similar solvents are used instead of oil, the solvent will thin the resin on the surface, reducing the adhesion between the stones. Applications using soapy solutions should be avoided as foaming may occur in the resin. For high-meterage applications, finishing with a special Isopave Lightweight Finishing Machine is preferred. If slip resistance is desired immediately after application, Isopave Glass Powder can be sprinkled to finish the surface.
- Surface problems may occur in applications performed in environments below +5 ºC and above +35 ºC.
- Application surfaces must be dry and clean.
- Safety precautions specified on the can and in the TDS should be taken before application.
- Application should be carried out according to the specified application characteristics.
- After partial use; the container should be tightly closed and care should be taken to prevent air from entering the container.
- Contact with skin and eyes should be avoided; in case of contact, wash with plenty of water and consult a doctor.
- The product should not be in contact with water during the drying time.
- Immediately after application, before the resin hardens, equipment should be cleaned with cellulosic thinner.
- Stone Carpet is not a waterproofing material and is permeable. It is recommended that waterproofing be done before application in indoor and outdoor areas where impermeability is desired.
- Empty containers should not be used to store food or drinking water.
- Safety and Health Warnings:
- Protective goggles, clothing and gloves should be worn.
- Avoid contact with skin, eyes and clothing.
- The product must be prevented from spreading into the environment.
- Eating, drinking, and smoking should be avoided during use.
- All packaging and containers should be carefully packaged to minimize spills.
- Containers should be kept tightly sealed when not in use.
- Keep away from heat, sparks, flames, and hot surfaces.
- Broken packages should not be handled without protective equipment.
- Empty containers should not be reused. They should be treated as contaminated waste.
- If clothing becomes soiled, it should be removed immediately and washed before reuse.
- The product should be stored in clearly labeled containers.
- Keep out of reach of children.
- Keep away from food, beverages, and animal feed.
- Storage should only be in the original container.
- Containers should be stored upright in a cool, well-ventilated place, tightly closed.
- Containers should be protected from damage.
- The data and recommendations or other support services contained in this document are based on our current knowledge and experience and are provided to the best of our knowledge. Given the numerous factors that may affect the processing and application of our products, this data does not exempt processors from conducting their own research and testing, particularly regarding the suitability of the supplied goods for the processes and purposes for which they are intended; nor does this data constitute a guarantee of specific properties or the suitability of the product for a particular purpose. Any description, drawing, photograph, data, ratio, weight, measured value, etc., given herein are subject to change without prior notice and do not constitute the agreed contractual quality of the product. It is the responsibility of the buyer of our products to ensure that all proprietary rights and applicable laws and regulations are complied with.
6 kg Set in Plastic Buckets (A: 4kg, B: 2kg)
Can be stored for one year in unopened original packaging in environments between 5-35°C, away from direct sunlight. Must be protected from extreme temperatures and humidity.